Facile access to pyridinium-based bent aromatic amphiphiles: nonionic surface modification of nanocarbons in water

• Lorenzo Catti,
• Shinji Aoyama and
• Michito Yoshizawa

Beilstein J. Org. Chem. 2024, 20, 32–40, doi:10.3762/bjoc.20.5

• )2–Y (Y = OCH3, OH, and imidazole)). The new amphiphiles quantitatively self-assemble into ≈2 nm-sized aromatic micelles in water independent of the side-chain. Importantly, efficient water-solubilization and nonionic surface modification of various nanocarbons (e.g., fullerene C60, carbon nanotubes

• ., graphitic carbon nitride) in the form of 10–30 nm-sized stacks is also demonstrated using the present amphiphiles. Keywords: aromatic micelle; nanocarbon; nonionic surface modification; pyridinium; water-solubilization; Introduction Nanocarbons, such as fullerenes, graphenes, and carbon nanotubes, are

• of the side-chain present. Importantly, efficient water-solubilization and nonionic surface modification of nanocarbons (i.e., fullerene C60 (C60), single/multi-walled carbon nanotubes (s/m-CNT), and graphene nanoplatelets (GN)) can be achieved through noncovalent encircling with the present

Radical chemistry in polymer science: an overview and recent advances

• Zixiao Wang,
• Feichen Cui,
• Yang Sui and
• Jiajun Yan

Beilstein J. Org. Chem. 2023, 19, 1580–1603, doi:10.3762/bjoc.19.116

• employed technique for industrial production of polymeric materials, and other polymer synthesis involving a radical process. Post-polymerization modification, including polymer crosslinking and polymer surface modification, is the key process that introduces functionality and practicality to polymeric

• constantly acquire new inspirations from organic chemists. Dialogues on radical chemistry between the two communities will deepen the understanding of the two fields and benefit the humanity. Keywords: crosslinking; polymer surface modification; post-polymerization modification; radical chemistry; radical

• used in post-polymerization modification, including chemical crosslinking of polymers and polymer surface modification. Radicals are powerful tools for post-polymerization processes because of their exceptional reactivity. In contrast to the previous sections, we set the topic of section 4 on the

An initiator- and catalyst-free hydrogel coating process for 3D printed medical-grade poly(ε-caprolactone)

• Jochen Löblein,
• Thomas Lorson,
• Miriam Komma,
• Tobias Kielholz,
• Maike Windbergs,
• Paul D. Dalton and
• Robert Luxenhofer

Beilstein J. Org. Chem. 2021, 17, 2095–2101, doi:10.3762/bjoc.17.136

• surface modification, we also observe bulk polymerization, which is expected for this method, and currently limits the controllability of this procedure. Keywords: additive manufacturing; light-induced polymerization; self-initiated photografting and photopolymerization; surface-initiated polymerization

• ; surface modification; Introduction Additive manufacturing, commonly referred to as three-dimensional (3D) printing, is an approach to create physical objects using layer-by-layer [1] or voxel-by-voxel fabrication [2]. 3D printed materials can be used for a broad spectrum of applications, including

• demonstrate this surface modification using a hydrogel, poly(2-hydroxyethyl methacrylate) (PHEMA) [19]. However, this approach should have broad utility for a spectrum of monomers and macromonomers susceptible to radical polymerization onto (almost) any surface featuring C–H bonds. This hydrogel coating is

Photoinduced post-modification of graphitic carbon nitride-embedded hydrogels: synthesis of 'hydrophobic hydrogels' and pore substructuring

• Cansu Esen and
• Baris Kumru

Beilstein J. Org. Chem. 2021, 17, 1323–1334, doi:10.3762/bjoc.17.92

• propose a straightforward photo-based surface modification to introduce hydrophobicity on a hydrophilic network by taking advantage of the photoactive g-CN nanosheets. As explained in the preparation section, the resulting HGCM was immersed in the hydrophobic monomer 4-methyl-5-vinylthiazole, denoted as

• vTA, then exposed to visible light irradiation to initiate an in situ surface photomodification. Extensive studies over the last years demonstrated photoinduced g-CN surface modification methods through a photoredox system. vTA, which is a common food additive to donate a nutty taste, has previously

• contrast to HGCM and HGCM-vTA. Moreover, the altered HGCM absorbance after surface modification provides enhanced absorption in deep UV range (Figure 1b). In addition, digital images of HG, HGCM, HGCM-vTA under UV light irradiation also reveal their emissive properties (Supporting Information File 1

Encrypting messages with artificial bacterial receptors

• Pragati Kishore Prasad,
• Naama Lahav-Mankovski,
• Leila Motiei and
• David Margulies

Beilstein J. Org. Chem. 2020, 16, 2749–2756, doi:10.3762/bjoc.16.225

• information protection at the molecular level. Keywords: artificial receptors; cell surface modification; fluorescent probes; molecular cryptography; Introduction In living cells, information is processed and transferred via a series of recognition and signaling events, which normally begin by the binding

N-doped carbon dots covalently functionalized with pillar[5]arenes for Fe³⁺ sensing

• Jia Gao,
• Ming-Xue Wu,
• Dihua Dai,
• Zhi Cai,
• Yue Wang,
• Wenhui Fang,
• Yan Wang and
• Ying-Wei Yang

Beilstein J. Org. Chem. 2019, 15, 1262–1267, doi:10.3762/bjoc.15.123

• and surface modification to offer novel C-dots with attracting properties [8]. It is worth noting that surface modification can not only tune the functional groups of fluorescent C-dots but also endow a variety of functionalities to C-dots and expand the applicability of C-dots [8][9][10]. Synthetic

Diaminoterephthalate–α-lipoic acid conjugates with fluorinated residues

• Leon Buschbeck,
• Aleksandra Markovic,
• Gunther Wittstock and
• Jens Christoffers

Beilstein J. Org. Chem. 2019, 15, 981–991, doi:10.3762/bjoc.15.96

• sensorics [19], microcontact printing [20], dip-pen nanolithography [21], microfluidics [22], and protection of nanoparticles [23]. Initially, surface modification aimed on controlling physical properties of surfaces [24][25], while nowadays chemical surface properties can be tuned to yield platforms for

Efficient synthesis of 4-substituted-ortho-phthalaldehyde analogues: toward the emergence of new building blocks

• Clémence Moitessier,
• Ahmad Rifai,
• Pierre-Edouard Danjou,
• Isabelle Mallard and
• Francine Cazier-Dennin

Beilstein J. Org. Chem. 2019, 15, 721–726, doi:10.3762/bjoc.15.67

• presence of the versatile polar anchoring group can lead to surface modification inducing a growing interest in these ortho-phthalaldehyde analogues for further application. Experimental Materials and methods All the chemicals were purchased from Acros Organic or Sigma-Aldrich and were used as received

Recent applications of chiral calixarenes in asymmetric catalysis

• Mustafa Durmaz,
• Erkan Halay and
• Selahattin Bozkurt

Beilstein J. Org. Chem. 2018, 14, 1389–1412, doi:10.3762/bjoc.14.117

• catalytic supports. Surface modification of MNPs with chiral organocatalysts for asymmetric catalysis provides sustainable materials which could perform chiral transformations robustly and readily [62][63]. In this context, the use of chiral calixarenes is very limited. For the first time, a chiral

Recent applications of click chemistry for the functionalization of gold nanoparticles and their conversion to glyco-gold nanoparticles

• Vivek Poonthiyil,
• Thisbe K. Lindhorst,
• Vladimir B. Golovko and
• Antony J. Fairbanks

Beilstein J. Org. Chem. 2018, 14, 11–24, doi:10.3762/bjoc.14.2

• azide–alkyne Huisgen cycloaddition AuNP surface modification using NCAAC The azide–alkyne Huisgen cycloaddition (AAC) is a 1,3-dipolar cycloaddition between an organic azide and an alkyne that gives triazole products [37][38]. The non-catalysed azide–alkyne Huisgen cycloaddition (NCAAC) is very slow

• synthesize peptide-decorated AuNPs [59] and nanomaterial hybrids containing single walled carbon nanotubes and AuNPs [60]. AuNP surface modification by CuAAC The distinct advantages of CuAAC over NCAAC, such as improved regioselectivity and rates of the reaction, motivated several groups to use CuAAC for the

• surface modification of AuNPs. In 2006, Brennan et al. demonstrated that enzyme–AuNP conjugates could be synthesized by CuAAC [47]. Azide-functionalized AuNPs were first synthesized by treating standard 14 nm Cit-AuNPs [28] with an a queous solution of an azide-containing thiol ligand (Scheme 7). An

Phosphonic acid: preparation and applications

• Charlotte M. Sevrain,
• Mathieu Berchel,
• Hélène Couthon and
• Paul-Alain Jaffrès

Beilstein J. Org. Chem. 2017, 13, 2186–2213, doi:10.3762/bjoc.13.219

• phosphorus-containing functional groups [2], on specific applications (hybrid materials [3], surface modification [4], oil industry [5]) or dedicated to a family of compounds (e.g., aminophosphonic acids [6], organometallic phosphonic acids [7]). However, no recent review was focused on the different methods

Strategies toward protecting group-free glycosylation through selective activation of the anomeric center

• A. Michael Downey and
• Michal Hocek

Beilstein J. Org. Chem. 2017, 13, 1239–1279, doi:10.3762/bjoc.13.123

• incubation with the sugar in aqueous buffer at pH 10. In all cases the Michael addition took place regioselectively at the anomeric position of the carbohydrate moiety. Each of the two surface-modification steps as well as the incubation steps was characterized using X-ray photoelectron spectroscopy (XPS) to

Interactions between shape-persistent macromolecules as probed by AFM

• Johanna Blass,
• Jessica Brunke,
• Franziska Emmerich,
• Cédric Przybylski,
• Vasil M. Garamus,
• Artem Feoktystov,
• Roland Bennewitz,
• Gerhard Wenz and
• Marcel Albrecht

Beilstein J. Org. Chem. 2017, 13, 938–951, doi:10.3762/bjoc.13.95

• measurements. Small-angle neutron and X-ray (SANS/SAXS) scattering experiments confirm the stiffness of the polymer chains with an apparent contour length of about 130 Å. Surface modification of planar silicon wafers as well as AFM tips was realized by covalent bound formation between the terminal amino groups

Sulfamide chemistry applied to the functionalization of self-assembled monolayers on gold surfaces

• Loïc Pantaine,
• Vincent Humblot,
• Vincent Coeffard and
• Anne Vallée

Beilstein J. Org. Chem. 2017, 13, 648–658, doi:10.3762/bjoc.13.64

• gold based on the sulfamide chemistry and to partially regenerate the amino SAM. The surface modification process is studied by water contact angle measurements (WCA), Fourier transform infrared reflection absorption spectroscopy (PM-IRRAS) and X-ray photoelectron spectroscopy (XPS). Results and

Fast and efficient synthesis of microporous polymer nanomembranes via light-induced click reaction

• Qi An,
• Youssef Hassan,
• Xiaotong Yan,
• Peter Krolla-Sidenstein,
• Tawheed Mohammed,
• Mathias Lang,
• Stefan Bräse and
• Manuel Tsotsalas

Beilstein J. Org. Chem. 2017, 13, 558–563, doi:10.3762/bjoc.13.54

• radicals. Additional thiol moieties can undergo hydrogen transfer to the vinyl radical leading to thiyl radicals and vinyl sulfides. The vinyl sulfides can then undergo a thiol–ene coupling (TEC) reaction, leading to bis-sulfide species. TYC has been used for surface modification [21][22

Organic chemistry meets polymers, nanoscience, therapeutics and diagnostics

• Vincent M. Rotello

Beilstein J. Org. Chem. 2016, 12, 1638–1646, doi:10.3762/bjoc.12.161

• nanocomposite materials, including regular structures using diblock copolymers [25][26] and nanoparticle–protein [27][28] and nanoparticle–nucleic acid composites [29]. Concurrently with our 3D self-assembly, we pursued the use of nanoparticles for surface modification. This research has focused on the use of

Synthesis, structure, and mechanical properties of silica nanocomposite polyrotaxane gels

• Kazuaki Kato,
• Daisuke Matsui,
• Koichi Mayumi and
• Kohzo Ito

Beilstein J. Org. Chem. 2015, 11, 2194–2201, doi:10.3762/bjoc.11.238

• through the cross-links and lead to several unique properties [11][12][13][14][15][16]. Polyrotaxanes were also applied for surface modification of substrates by attaching the cyclic components to the surface [17]. These results were based on the indirect connection among different polymers or between

Ru complexes of Hoveyda–Grubbs type immobilized on lamellar zeolites: activity in olefin metathesis reactions

• Hynek Balcar,
• Naděžda Žilková,
• Martin Kubů,
• Michal Mazur,
• Zdeněk Bastl and
• Jiří Čejka

Beilstein J. Org. Chem. 2015, 11, 2087–2096, doi:10.3762/bjoc.11.225

• developed [1][5][13]; most of them are based on surface modification by specially designed linkers providing covalent bond linkage between the support and Ru complex. Hoveyda–Grubbs type catalysts are also capable of direct (linker-free) immobilization by means of non-covalent interactions [8][14][15][16

Preparative semiconductor photoredox catalysis: An emerging theme in organic synthesis

• David W. Manley and
• John C. Walton

Beilstein J. Org. Chem. 2015, 11, 1570–1582, doi:10.3762/bjoc.11.173

• opportunity for surface modification of the semiconductors with metals or dyes to extend the capability into the visible light region. This is a step nearer to directly channeling the Sun’s energy into synthetic chemistry. Though not proven beyond doubt, the likelihood is that surface OH groups on the

Synthesis of a hexasaccharide partial sequence of hyaluronan for click chemistry and more

• Marina Bantzi,
• Stephan Rigol and
• Athanassios Giannis

Beilstein J. Org. Chem. 2015, 11, 604–607, doi:10.3762/bjoc.11.67

• , allowing it to be used for surface modification via click chemistry. After suitable deprotection it can be used for biophysical studies by interaction with an alkyne group of suitably prepared proteins or proteoglycans giving the opportunity to gain deeper insights into ECM processes. Eventually, this

Organic chemistry on surfaces: Direct cyclopropanation by dihalocarbene addition to vinyl terminated self-assembled monolayers (SAMs)

• Malgorzata Adamkiewicz,
• David O’Hagan and
• Georg Hähner

Beilstein J. Org. Chem. 2014, 10, 2897–2902, doi:10.3762/bjoc.10.307

• (SAMs) are increasingly being used as a means of surface modification to alter properties in a tuneable manner [1][2][3]. The major classes of SAMs are those with adsorbed long chain alkyl thiols on gold surfaces/nanoparticles [4][5], or long chain alkylsilanes on silica surfaces [6][7]. Two general

• approaches are taken to achieve surface modification as illustrated in Figure 1. The first involves incorporating pre-functionalised alkylsilanes/alkylthiols carrying functional groups (FG) to generate the SAM directly, whereas the second approach involves chemical modification of a pre-assembled monolayer

• of vinyl-terminated SAMs has been demonstrated, e.g., through surface modification of radicals generated by C–O bond thermolysis [17] and in a more controlled sense via olefin cross metathesis/enyne metathesis [18] of mixed vinyl and acetylenyl-terminated SAMs followed by Diels–Alder modifications of

Detonation nanodiamonds biofunctionalization and immobilization to titanium alloy surfaces as first steps towards medical application

• Juliana P. L. Gonçalves,
• Afnan Q. Shaikh,
• Manuela Reitzig,
• Daria A. Kovalenko,
• Jan Michael,
• René Beutner,
• Gianaurelio Cuniberti,
• Dieter Scharnweber and
• Jörg Opitz

Beilstein J. Org. Chem. 2014, 10, 2765–2773, doi:10.3762/bjoc.10.293

• substrate. Keywords: biofunctionalization; carbon-nanomaterials; detonation nanodiamond; electrochemical immobilization; surface modification; titanium alloy; Introduction Detonation nanodiamonds (DND) are a promising carbon-derived nanoscale material, which has been investigated since some decades due to

• of their excellent corrosion properties, good mechanical strength and osteointegration, due to naturally occurring oxide layer at their surface [16]. Based on the surface oxide properties, various methods of surface modification of titanium and its alloys have been realized in the past decades to

• regioselective partial incorporation of biofunctional molecules into anodically grown oxide layers. The authors electrochemically immobilized nucleic acids on titanium alloys for its surface modification with bioactive molecules [21][22][23][24][25], as, e.g., oligonucleotides and RGD peptide conjugates, for

Molecular recognition of surface-immobilized carbohydrates by a synthetic lectin

• Melanie Rauschenberg,
• Eva-Corrina Fritz,
• Christian Schulz,
• Tobias Kaufmann and
• Bart Jan Ravoo

Beilstein J. Org. Chem. 2014, 10, 1354–1364, doi:10.3762/bjoc.10.138

• morphology [47][48][49][50]. Therefore, the epoxide SAMs were prepared by the method of Julthongpiput et al. because well-defined monolayers of epoxides on glass and silicon substrates can be obtained by using (3-glycidoxypropyl)trimethoxysilane in toluene [42]. The successful surface modification was

Atherton–Todd reaction: mechanism, scope and applications

• Stéphanie S. Le Corre,
• Mathieu Berchel,
• Hélène Couthon-Gourvès,
• Jean-Pierre Haelters and
• Paul-Alain Jaffrès

Beilstein J. Org. Chem. 2014, 10, 1166–1196, doi:10.3762/bjoc.10.117

• can be divided in two broad categories depending on the presence of polymerizable groups. When polymerizable groups are present, the fire-resistant molecule can be included in polymers by copolymerization or can act as a crosslinking agent. This type of compounds is also employed for the surface

• modification of fibers or polymers (e.g., plasma technique). Without a polymerizable group, phosphoramidates can be used as an additive in polymers. Gaan et al. [113] have studied the thermal decomposition of cotton cellulose treated with different phosphoramidates. More specifically, they have shown that a

Integrating reaction and analysis: investigation of higher-order reactions by cryogenic trapping

• Skrollan Stockinger and
• Oliver Trapp

Beilstein J. Org. Chem. 2013, 9, 1837–1842, doi:10.3762/bjoc.9.214

• catalyst can be applied to the surface modification of glassware to obtain catalytically active bulk reactors, i.e. coated glass stir bars (Figure 1d). The use of catalytically active fused-silica capillaries in analytical separation devices is a very powerful approach, because several reactions can be